Repair & equipment · Kingman, AZ
Pool Filter Repair in Kingman, AZ
As of August 2026, pool filter repair typically runs $100–$400; a full replacement runs $500–$2,500 depending on filter type. Cloudy water despite balanced chemicals or a high pressure gauge usually points here, not the pump.
Repair vs. replace, by filter type
| Filter type | New, installed | Ongoing maintenance |
|---|---|---|
| Sand | $500–$1,200 | Media replacement every 5–7 years, $50–$150 |
| Cartridge | $700–$1,600 | New cartridge every 1–3 years, $100–$300 |
| DE (diatomaceous earth) | $1,200–$2,500 | Annual powder replenishment, $50–$120 |
A straightforward repair -- a gasket, a valve, replacing worn media -- runs $100 to $400 regardless of filter type. The decision point is simple: if a repair quote gets close to half of what a new filter costs installed, replacement is usually the better long-term value, especially on an older filter that's likely to need another repair soon anyway.
Symptoms that point here, not the pump
- Cloudy water despite balanced chemistry -- if a cleaning visit confirms chemicals are in range and the water is still cloudy, the filter isn't catching what it should.
- High pressure gauge reading -- roughly 8-10 psi above the clean starting pressure means the media is clogged; backwashing or cleaning usually resolves a one-off, but frequent fast clogging points to a bigger issue.
- Visible leaks at the tank or fittings -- a cracked housing, worn O-ring, or failed gasket.
Not your issue?
If the pump itself sounds off or won't run, see pool pump repair. If the water is green rather than just cloudy, that's a chemical/algae issue, not a filter fault -- see green pool & algae cleanup. For the full overview, see pool repair & equipment in Kingman.
Common questions
How much does pool filter repair cost?
Repairs like a gasket, valve, or media replacement typically run $100 to $400. If repair costs approach half of what a new filter would cost, replacement is usually the better value.
How much does a new pool filter cost installed?
Depends on the type: sand filters run $500–$1,200 installed, cartridge filters $700–$1,600, and DE (diatomaceous earth) filters $1,200–$2,500 -- DE filters cost more but generally filter the finest particles.
What causes cloudy water even when chemicals are balanced?
Usually the filter -- a torn cartridge, channeled/fouled sand media, or a filter that's undersized for the pump's flow rate. If a cleaning company has confirmed chemistry is in range and water is still cloudy, filter repair or replacement is the likely next step.
Why is my filter pressure gauge reading high?
A high reading (typically 8-10 psi above the clean starting pressure) means the filter media is clogged and restricting flow -- usually solved with a backwash/cleaning, though repeated fast clogging can point to a filter that's undersized or a media that needs replacing.
Free · no obligation
Get your filter checked
Describe the symptom -- cloudy water, high pressure, a visible leak -- and we'll match you with an independent Kingman-area equipment repair company.
Serving Kingman, Golden Valley, and Butler, Arizona.